GOST 22033-76 Threaded rod with a tolerance of 1d

Analogs ГОСТ 22033-76:

TABLE OF CONFORMITY DIN, ISO, AN, ART, GOST

DIN 938

Buy ГОСТ 22033-76

New

DIN 938 8,8 zinc threaded Pin with tolerance 1d

DIN 938 8,8 zinc threaded Pin with tolerance 1d

DIN 938 8,8 zinc threaded Pin with tolerance 1d Fastening groupHigh-strength..StandardDIN 938MaterialStalStrength class8.8CoatingZincDiameter, mm8, 10, 12, 16, 20..Length, mm20, 25, 30, 35..Packaging, pcs.200, 25, 1, 10..Type of carvingPartiallyThread typeMetricThreading step, mm1.25, 1.5, 1.75..AnalogГОСТ 22033-76

New

DIN 938 A2 threaded Pin with tolerance 1d

DIN 938 A2 threaded Pin with tolerance 1d Fastening groupStainless steel..StandardDIN 938MaterialStainless steel..Diameter, mm5, 6, 8, 10, 12..Length, mm16, 20, 25, 30..Packaging, pcs.200, 100, 25, 10..Type of carvingPartiallyThread typeMetricThreading step, mm0.8, 1, 1.25, 1.5..AnalogГОСТ 22033-76

New

DIN 938 8,8 threaded Pin with tolerance 1d

DIN 938 8,8 threaded Pin with tolerance 1d

DIN 938 8,8 threaded Pin with tolerance 1d Fastening groupHigh-strength..StandardDIN 938MaterialStalStrength class8.8CoatingUncoveredDiameter, mm8, 10, 12, 16, 20..Length, mm20, 25, 30, 35..Packaging, pcs.25, 10, 50, 5Type of carvingPartiallyThread typeMetricThreading step, mm1.25, 1.5, 1.75..AnalogГОСТ 22033-76

New

DIN 938 A4 threaded Pin with tolerance 1d

DIN 938 A4 threaded Pin with tolerance 1d Fastening groupStainless steel..StandardDIN 938MaterialStainless steel..Diameter, mm5, 6, 8, 10, 12..Length, mm16, 20, 25, 30..Packaging, pcs.200, 100, 25, 10..Type of carvingPartiallyThread typeMetricThreading step, mm0.8, 1, 1.25, 1.5..AnalogГОСТ 22033-76

New

DIN 938 5,6 zinc threaded Pin with tolerance 1d

DIN 938 5,6 zinc threaded Pin with tolerance 1d

DIN 938 5,6 zinc threaded Pin with tolerance 1d StandardDIN 938MaterialStalStrength class5.6CoatingZincDiameter, mm10, 12, 16, 20..Length, mm20, 25, 30, 35..Packaging, pcs.100, 25, 10, 50Type of carvingPartiallyThread typeMetricThreading step, mm1.5, 1.75, 2, 2.5..AnalogГОСТ 22033-76

New

DIN 938 5,6 threaded Pin with tolerance 1d

DIN 938 5,6 threaded Pin with tolerance 1d

DIN 938 5,6 threaded Pin with tolerance 1d StandardDIN 938MaterialStalStrength class5.6CoatingUncoveredDiameter, mm8, 10, 12, 16, 20..Length, mm20, 25, 30, 35..Type of carvingPartiallyThread typeMetricThreading step, mm1.25, 1.5, 1.75..AnalogГОСТ 22033-76

New

DIN 938 5,8 threaded Pin with tolerance 1d

DIN 938 5,8 threaded Pin with tolerance 1d

DIN 938 5,8 threaded Pin with tolerance 1d StandardDIN 938MaterialStalStrength class5.8CoatingUncoveredDiameter, mm5, 6, 8, 10, 12..Length, mm16, 18, 20, 22..Type of carvingPartiallyThread typeMetricThreading step, mm0.8, 1, 1.25, 1.5..AnalogГОСТ 22033-76

New

DIN 938 5,8 zinc threaded Pin with tolerance 1d

DIN 938 5,8 zinc threaded Pin with tolerance 1d

DIN 938 5,8 zinc threaded Pin with tolerance 1d StandardDIN 938MaterialStalStrength class5.8CoatingZincDiameter, mm8, 10..Length, mm20, 25, 30, 35..Type of carvingPartiallyThread typeMetricThreading step, mm1.25, 1.5, 1.75..AnalogГОСТ 22033-76

Technical characteristics ГОСТ 22033-76

Дивіться ще більше експертних відео на нашому Ютуб каналі

Експертний відеоблог

Specifications GOST 22033-76 Threaded rod with a tolerance of 1d | Dinmark>

Look over PDF drawings

Specifications

Fastening group

High-strength fastening

Standard

DIN 938

Material

Stal

Strength class

8.8

Coating

Zinc

Diameter, mm

5 6 8 10 12 14 16 18 20 22 24 27 30

Length, mm

16 18 20 22 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 120 130 140 150 160 180

Packaging, pcs.

200 25 1 10 50 20

Type of carving

Partially

Thread type

Metric

Threading step, mm

0.8 1 1.25 1.5 1.75 2 2.5 3 3.5

Analog

ГОСТ 22033-76

The GOST 22033-76 stud is a threaded connecting part with tapped ends used to connect machine and mechanism parts. GOST 22033-76 belongs to the group of studs with a thread diameter tolerance of 1d, which means that the thread diameter of a stud may differ from the nominal value by +/- 1 thread diameter. For example, if the nominal thread diameter of GOST 22033-76 is M10, then the thread diameter tolerance 1d will be equal to M10 +/- 0.1 mm. Thus, the actual thread diameter can be in the range from M9.9 to M10.1 mm.

Strength class of GOST 22033-76

The strength class of a GOST 22033-76 stud is the maximum applied force at which the stud begins to fracture. Studs of GOST 22033-76 are manufactured in strength classes from 5.6 to 8.8. From strength class 8.8, the stud is considered high-strength.

Fastening group of GOST 22033-76

Depending on the material of manufacture, studs of GOST 22033-76 are divided into groups:

Stainless fasteners
High-strength fasteners

Materials for the manufacture of GOST 22033-76 studs

Studs of GOST 22033-76 are made of the following materials:

Steel with a strength class of 5.6 to 8.8, which can be additionally coated with zinc. Zinc (Plated) protects against corrosion if the fasteners are to be used in aggressive environments.
Stainless steel grades A2 and A4. The steel grade allows the fasteners to be used at significant temperature drops and in aggressive and humid environments.

Application range of GOST 22033-76 studs

Studs of GOST 22033-76 are used in such industries as automotive, instrumentation, and large studs are also actively used in construction, in the installation of metal structures and wooden elements.

Advantages of buying in the Dinmark online store