AISI 410 STEEL is a martensitic chromium-nickel stainless steel that offers high corrosion resistance, wear resistance, and good strength.
Advantages of AISI 410 Steel:
- Corrosion resistance: AISI 410 has high corrosion resistance in atmospheric conditions, fresh and salt water, solutions of acids and alkalis, and a number of other aggressive environments.
- Wear resistance: AISI 410 exhibits high wear resistance, making it capable of withstanding significant abrasive loads.
- Strength: AISI 410 possesses good strength at both room and high temperatures.
- Heat resistance: AISI 410 can be used at temperatures up to 870°C without significant oxidation or loss of strength.
- Magnetic properties: AISI 410 is a magnetic steel.
- Machinability: AISI 410 can be machined by various methods, making it suitable for manufacturing complex-shaped parts.
Chemical composition:
| Element | Content, % |
|---|---|
| Chromium | 11.5-13.5 |
| Nickel | <2.0 |
| Manganese | 1.0 max |
| Silicon | 1.0 max |
| Carbon | 0.15-0.45 |
| Nitrogen | 0.04-0.25 |
| Copper | 0.50 max |
| Sulfur | 0.030 max |
| Phosphorus | 0.030 max |
| Iron | remainder |
Mechanical properties:
| Property | Value |
|---|---|
| Tensile strength | 700-950 MPa |
| Brinell hardness | 200-260 HB |
| Elongation at break | 12-20% |
| Impact toughness | 80-120 J/cm² |
Physical properties:
| Property | Value |
|---|---|
| Density | 7.7 g/cm³ |
| Melting point | 1450°C |
| Thermal conductivity | 26.9 W/(m·K) |
| Electrical resistivity | 1.05 μΩm |
Analogues:
| Country | Analogue |
|---|---|
| USA | AISI 410 |
| European Union | EN 1.4006 |
| Ukraine | 12Х13 |
Most common applications of AISI 410 STEEL:
- Corrosion-resistant products:
- Knife blades
- Surgical instruments
- Machine parts
- Piping elements
- Wear-resistant products:
- Shafts
- Gears
- Bearings
- Dies
- Heat-resistant products:
- Furnace parts
- Heat-resistant parts
- Exhaust system elements
- Decorative elements:
- Architectural elements
- Cladding
- Tableware
AISI 410 STEEL is a versatile material that can be used in various conditions. It is suitable for applications requiring corrosion resistance, wear resistance, high temperatures, and good strength.
Important notes:
- AISI 410 Steel has low oxidation resistance at temperatures above 870°C.
- Due to its magnetic properties, AISI 410 is not recommended for use in certain electrical applications.
- To improve corrosion resistance, AISI 410 can be heat treated - hardened and tempered.
When choosing stainless steel, it is important to consider the operating conditions and required properties. AISI 410 can be an optimal choice for applications where high corrosion resistance, wear resistance, and strength at moderate temperatures are required. For applications requiring oxidation resistance at high temperatures or non-magnetic properties, other stainless steel grades should be considered.